Heat Exchangers & Oil Cooling

HEAT EXCHANGERS

'New' ACIP Oil Air Cooler - Integrated Pump

Oil air cooler system with a combination of a motor/pump station and ACI oil air cooler in a single unit that operates offline from the system. Pump flange is connected to a bellhousing, making it possible to choose your own pump. Various installation positions are achievable and a wide range of different sizes available. 

'New' ACM Oil Air Cooler - Mobile

Oil air cooler for mobile applications with numerous sizes and cooling capacities. The coolers are supplied with 12/24 VDC compact fans making them perfect to be use in mobile hydraulic power units e.g. agricultural, transport and forestry sectors. Swift delivery with parts on stock. 

ACI Oil Air Cooler - Industrial

Oil air cooler for industrial use, available in 10 different sizes. Cooling block construction (max. operating pressure 16 bar) with 1-way design, also available in 2-way or with internal bypass valve upon request. 230-400V Drive Motor 

EKM Shell/Tube Oil Cooler
Tube bundle with aluminium fins, providing up to 4 times greater cooling surface compared to a standard shell and tube cooler. Cooling capacity up to 230 kW. Extremely pressure resistant – (35 bar max). Removable end caps for easy cleaning of the water pipes. Optionally available with internal bypass valve (patented), as well as a seawater version.

UKC-G Oil/Water Cooler

Especially compact design with highly efficient cooling capacity. Cost effective as well as being a space saving solution. Can be mounted into a tank or gearbox for new and existing installations. Special lengths available on request.

DOC Plate Heat Exchangers

DOC series of brazed plate heat exchanger is characterised mainly by its enormous level of resilience making it the ideal heat exchanger for many applications in industrial hydraulics. 6 standard types, and 30 different sizes in total. Provides a maximum cooling capacity of 360kW at pressures up to 40bar. Many parts can be delivered from stock or on short lead times

Bellhousings With Integrated Oil Air Cooler

PTÖK series bellhousing with integrated cooler to suit IEC motors from 0.55kW to 22kW. Integrated damping to reduce noise and vibration. Can be installed vertically as well as horizontally. A standard bell housing allows for connection of drive motors to pumps. Our bell housing with integrated oil cooler provides a low cost, compact solution for coupling and cooling in one, requiring no electrical installation. A fan wheel is driven directly by the motor shaft drawing air through the element cooling the oil.

Contact Us